Thermal pretreatment is a shared method to improve the efficiency of straw biochemical conversion. However, the process is often accompanied by problems such as the loss of carbon source. The objective of this study was to develop a novel thermal pretreatment method, called air frying, with less loss of biodegradable organic matter and favorable surface hydrophilicity. After pretreatment of two straws, the sugar yields were improved, and the improvement effect of corn stover was more significant. The total saccharification rate of corn stover increased from 31.31 ± 1.06% to 44.77 ± 1.23%, and the cellulose conversion rate increased from 44.10 ± 1.85% to 67.44 ± 2.37%. Functional groups with lower polarity on the surface were oxidized into the one with stronger polarity, so the hydrophilicity was enhanced. The surface roughness decreased, the surface tended to be flat, the original pores collapsed, and the average pore size increased, which was more conducive to the binding of enzyme and active site. The matching relationship between the optimal conditions and substrate, and the possibility of scaling up need further study.Dairy manure (DM) is a kind of cheap cellulosic biomass resource which includes lignocellulose and mineral nutrients. Random stacks not only leads damage to the environment, but also results in waste of natural resources. The traditional ways to use DM include returning it to the soil or acting as a fertilizer, which could reduce environmental pollution to some extent. However, the resource utilization rate is not high and socio-economic performance is not utilized. To expand the application of DM, more and more attention has been paid to explore its potential as bioenergy or bio-chemicals production. This article presented a comprehensive review of different types of bioenergy production from DM and provided a general overview for bioenergy production. Importantly, this paper discussed potentials of DM as candidate feedstocks not only for biogas, bioethanol, biohydrogen, microbial fuel cell, lactic acid, and fumaric acid production by microbial technology, but also for bio-oil and biochar production through apyrolysis process. https://www.selleckchem.com/products/Fasudil-HCl(HA-1077).html Additionally, the use of manure for replacing freshwater or nutrients for algae cultivation and cellulase production were also discussed. Overall, DM could be a novel suitable material for future biorefinery. Importantly, considerable efforts and further extensive research on overcoming technical bottlenecks like pretreatment, the effective release of fermentable sugars, the absence of robust organisms for fermentation, energy balance, and life cycle assessment should be needed to develop a comprehensive biorefinery model.Ventilation Air Methane emissions (VAM) from coal mines lead to environmental concern because their high global warming potential and the loss of methane resources. VAM upgrading requires pre-concentration processes dealing with high flow rates of very diluted streams ( less then 1% methane). Therefore, methane separation and concentration is technically challenging and has important environmental and safety concerns. Among the alternatives, adsorption on Metal-Organic Frameworks (MOFs) could be an interesting option to methane selective separation, due to its tuneable character and outstanding physical properties. Most of the works devoted to the methane adsorption on MOFs deal with methane storage. Therefore, these works were reviewed to determine the properties governing methane-MOF interactions. In addition, the metallic ions and organic linkers roles have been identified. With these premises, decisive effects in the methane adsorption selectivity in nitrogen/methane lean mixtures have been discussed, since nitrogen is the most concentrated gas in the VAM stream, and it is very similar to methane molecule. In order to fulfill this overview, the effect of other aspects, such as the presence of polar compounds (moisture and carbon dioxide), was also considered. In addition, engineering considerations in the operation of fixed bed adsorption units and the main challenges associated to MOFs as adsorbents were also discussed.Nanoplastic exposure can potentially cause the severe transgenerational toxicity in organisms. However, the transgenerational nanoplastic toxicity and the underlying mechanisms are still largely unclear. Using Caenorhabditis elegans as an animal model, we here compared the transgenerational toxicity of two sizes of polystyrene nanoparticles (PS-NPs, 20 and 100 nm). The nematodes were exposed to PS-NPs at the P0 generation, and from the F1 generation the nematodes were grown under the normal condition. Exposure to 20 nm PS-NPs resulted in more severe transgenerational toxicity than exposure to 100 nm PS-NPs. At the concentration of 100 μg/L, the toxicity of 20 nm PS-NPs on locomotion and reproduction was detected at the F1-F6 generations, whereas the toxicity of 100 nm PS-NPs could only be observed at the F1-F3 generations. The difference in transgeneration toxicity between PS-NPs (20 nm) and PS-NPs (100 nm) was associated with the difference in transgenerational activation of oxidative stress. Based on observations on SOD-3GFP, HSP-6GFP, and HSP-4GFP expressions, PS-NPs (20 nm) and PS-NPs (100 nm) further induced different transgenerational responses of anti-oxidation, mt UPR, and ER UPR. Our data suggested that the induction of transgenerational toxicity of PS-NPs was size dependent in nematodes. The results are helpful for our understanding the cellular mechanisms for the induction of transgenerational nanoplastic toxicity in organisms.Using Aspergillus niger (A. niger) to produce low-concentration organic acids is challenging for dissolving In3O2 from waste LCD (liquid crystal display) panels with high toxicity. In this study, three bioleaching approaches from the general and the optimized fermentation systems were investigated respectively to compare indium recovery effects and firstly clarified its bioleaching mechanism. The indium bioleaching efficiency can be improved from 12.3% to 100% by fermentation method optimization. Carboxy groups from organic acids and proteins were the critical substances to release H+ for leaching indium mainly competed with iron via reactions analysis. The effective components increased after optimizing, including the dissociative H+ concentration, the effective carboxyl groups for leaching metal oxides, and the output of oxalic acid. A. niger biomass prevented the contact between H+ and In3O2 and adsorbed In3+ adverse to indium recovery. The bioleaching effects of fermentation broth for indium can be further promoted by controlling bioleaching process parameters.